6
Parts & Operations Manual
Victory Series
•
RECOMMENDED MINIMUM WIRE SIZE FOR EXTENSION CORDS:
Total Length of Cord 25 ft., 50 ft., 75 ft., 100 ft., 125 ft., 150 ft., 175 ft., 7.6 m, 15.2 m, 22.9 m, 30.5 m,
38.1 m, 45.7 m, 53.3 m,
Wire Size AWG 18, 18, 16, 16, 14, 14, 12
•
DO NOT
place any object on top of charger or place the charger on a soft surface that might block the
ventilation slots and result in excessive internal heat. Place the charger in a position away from any heat source.
The charger is ventilated through slots in the top and the bottom of the housing.
•
DO NOT
operate charger with damaged cord or plug — have them replaced immediately.
•
DO NOT
operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way.
•
Disconnect the charger from the outlet before attempting any cleaning. This will reduce the risk of electric
shock. Removing the battery pack will not reduce this risk.
•
NEVER
attempt to connect 2 chargers together.
•
The charger is designed to operate on standard household electrical power (120 V) or (240 V) with proper
country plug
How to Use:
Selecting the Nozzle
Rotate the nozzle clockwise to change the
size of the particules.
Align arrow to the
line on the nozzle.
The nozzle located
at the bottom is the
one activated.
Setting 3:
110 microns
Setting 1:
40 microns
Setting 2:
80 microns
This side is fully
illuminated when
charged.
This side is fully illuminated
when empty.
Charging the Battery
(2 hours charge time)
