background image

 

Hangzhou Roombanker Technology Co., Ltd.

                     

                            A DUSUN company

 

Hangzhou Roombanker Technology Co., Ltd.             Floor 8, building A, Wantong center,  
Tel:86-571-86769027/8  8810480                       Hangzhou 310004, china 
Website: www.dusuniot.com     www.dusunremotes.com   www.dusunlock.com 

and DSW-080 will send the secret key to the mobile app 
DSW-080  will  always  be  in  the  broadcasting  state  when  it  is  not  connected.  When  the  user  holds  the 
authorized mobile app close to it, it will connect and exchange the secret key. 
Whether to open the door automatically depends on the logic of the mobile app. 

 

11.3

 

Intercom control 
Can connect the phone to DSW-080 through a flat cable, and then connect DSW-080 to the network to 

realize remote control of the phone and remote real-time access to the status of the call. 

DSW-080 can be set as a Zigbee router, some Zigbee sensor and devices can connect to it. 

 

Remark:   
GND and SENSOR  is  for detect the action of bell ring , NO and COM is used for open the door. NC 

normal not to be used 

VCC can connect to the power supply of the intercom, in common , the voltage will be from 5VDC to 

12VDC 

The circuits and interfaces of different brands of intercom are different, so needed to confirm which ports 

are connected correctly. 

Step 1:Find the GND port 

Connect the multimeter and activate the mode to measure DC voltage. 

Summary of Contents for DSW-080



















Reviews: