13
5
Immerse the removed filter in lukewarm
water below 40°C and dry in a place with
proper ventilation with no direct sun light after
washing.
6
Please wet a soft cloth with lukewarm water and
wring it, then wipe off the dirt on the bottom
and sides of the inside of the device.
Maintenance before storing
Please conduct the following maintenance before
storing the device:
1
Follow the same steps under ‘Weekly
maintenance’
2
Dry each component before assembling it
3
Check that each component, including the filter,
has fully dried. Then assemble the device and
fully store it.
Spare parts
Spare parts and accessories can be requested at
the point of purchase or local distributor.
Attention:
Please do not use metal scourers,
melamine sponges, polishing powers, or solvents
like benzene, thinner, alcohol or other.
Attention:
Please ensure water cannot get onto
the fan. Moreover, please do not wipe the fan – not
even with a soft cloth! ¬– if it contains water. It can
cause a breakdown.
Attention:
Please place the water tray correctly
in the device. If the water tray is not correctly placed,
the power will not connect.
