Internet
Power
24-Port Gigabit Switch
PD
PC
Bridge
IP-Camera
AP
Link
Activity
Indicator
Power
Power
Indicator
PoE
Indicator
PD Device
Connection
Indication
PoE
Description
Normal
Troubleshooting
If red light is visible, please check if the
external power supply is connected correctly.
If red is light visible, please check if the
corresponding RJ45 access network device
and the network cable is connected correctly.
Verify that the network cable is Cat.5 or above
standard. Please check the network cable
and /or network device for any damage.
If the light is off, please check and replace the
RJ45 to see if it resolves the problem. It is likely
that the issue is with the switch port or connectivity
device such as the adapter, camera or IP phone.
Please contact our support engineers for assistance.
INSTALLATION DIAGRAM
Installation Suggestion:
1. Connect all your networking equipment (including any PoE devices) to the switch.
2. Connect power to your switch and wait a moment for it to power on.
3. Check the status of your switch.
4. Use the switch in a clean, cool and dry environment.
5. Remove the power cable before any new devices are connected to the switch.
6. Only use CAT 5 or above to ensure maximum distance of up to 100m.
