3
RMO200 Introduction, Safety Instructions
1 Introduction
This manual contains helpful instructions on how to use RMO200 in a safe, proper
and efficient way.
Following these instructions can help you to avoid dangerous situations, repair
costs and other miss happenings due to incorrect operation. Furthermore it
ensures the reliability and life cycle of your RMO200.
RMO200 must be used in observance of all existing safety requirements/ regulations
from national/local standards for accident prevention and environmental protection.
Reading the RMO200 manual alone does not release the user from the duty of
complying with all national and international safety regulations relevant for working
with RMO200.
2 Safety Instructions
Before operating RMO200, please carefully read the following safety instructions.
It is not recommended that the RMO200 will be used (or even turned on) without
the understanding of this manual.
RMO200 should only be operated by trained and authorized personnel.
Rules for Use
• RMO200 should only be used when in a technically fit condition. Its use should
be in accordance with the safety regulations for the actual working site and
application. Always be aware of the dangers of high voltages and currents
associated with this equipment and its environment. Pay attention to the
information provided in the operations manual.
• RMO200 is intended exclusively for the application areas specified in ”Designated
Use”. The manufacturer and distributors are not liable for damage resulting from
unintended usage. The user alone assumes all responsibility and risk.
• The instructions provided in this manual are considered part of the rules
governing proper usage.
• Do not open RMO200.
Orderly Practices and Procedures
• The manual should always be available on the site where the RMO200 is used.
• Before using RMO200, all personnel (even personnel who only occasionally, or
less frequent, work with RMO200) assigned to RMO200 should read the
operations manual.
• Do not undertake any modifications, extensions, or adaptations to the RMO200.
Cleaning
To clean RMO200, use a cloth dampened with isopropanol alcohol or water.
