Page 10 of 21
CLEANUP_INTERVAL_IN_MINUTE
Interval to clean up data log
[Default: 1440]
DAILY_END_TIME_ENABLE
Stop playing End of Day
0 = disable
1 = enable [Default]
USB_POLLING_TIME_FOR_MOUNT_IN_SECON
The polling time to check USB device
[Default: 30]
TELNET_ENABLE
Open Telnet port
0 = disable [Default]
1 = enable
IO_SERIAL_PORT_BARCODE_BAUDRATE
Baud rate on RS-232 communication (2400/9600)
[Default: 9600]
VOLUME
Master volume set, Range (0-32)
[Default: 16]
X_SCREEN_MODE
This is a READ ONLY value in netcfg.ini. The mode
value is reported by player.
1 (1280x720p60 – VGA)
12 (1920x1080i60 – VGA)
2 (1280x768p60 – VGA)
113 (NTSC – S-Video)
3 (1280x1024p60 – VGA)
114 (PAL – S-Video)
4 (1920x1080p60 – VGA)
201 (1280x720p60 – YUV)
5 (1024x768p60 – VGA)
212 (1920x1080i60 – YUV)
6 (800x600p60 – VGA)
213 (NTSC – YUV)
7 (640x480p60 – VGA)
214 (PAL – YUV)
8 (1920x1200p60 – VGA)
401 (1280x720p60 –
HDMI
)
9 (1600x900p60 – VGA)
404 (1920x1080p60 –
HDMI
)
10 (1600x900p60 – VGA)
405 (1024x768p60 –
HDMI
)
11 (1600x1200p60 – VGA)
411 (1600x1200p60 –
HDMI
)
NETWORK_NO
Network type
0 – RJ-45 cable [Default]
1 – Wi-Fi
[ For E1.10.10h only]
WIRELESS_SSID
SSID key
[ For E1.10.10h only]
WIRELESS_AUTHMODE
Security modes
WEP mode
WIRELESS_AUTHMODE=SHARED
WIRELESS_ENCRYPTYPE=WEP
WPA mode
WIRELESS_AUTHMODE=WPAPSK
WIRELESS_ENCRYPTYPE=TKIP
WPA2 mode
WIRELESS_AUTHMODE=WPA2PSK
WIRELESS_ENCRYPTYPE=TKIP
[ For E1.10.10h only]
WIRELESS_ENCRYPTYPE
WIRELESS_KEY
Password key
[ For E1.10.10h only]
TRACKTOTRACK_ENABLE
Function of Track to Track Gap removal
0 – Disable
1 – Enable [Default]
