Fig. 5.
10-30 CM
Fig. 6
Start-up
Before connecting to the mains supply, be sure that the supply voltage is identical with the
value given on the rating plate.
l
Unscrew the container from the spray gun.
l
Aligning suction tube. (Fig. 2)
If the suction tube is positioned correctly, the container contents can be sprayed without
almost any residue.
When working on lying objects: Turn the suction tube forwards. (Fig. 2 A)
Spraying work when working on overhead objects: Turn the suction tube rearwards. (Fig. 2
B)
l
Set the container on a sheet of paper, pour in the prepared coating material and screw the
container tightly onto the spray gun.
l
Put the machine down only on a level, clean surface. Otherwise the machine could tip over!
l
Adjust the spray setting on the spray gun.
Three different spray jet settings can be chosen on the spray gun, depending on the
application and target object.
Selecting the Spray Setting
Fig. 3 A = horizontal fat jet
Fig. 3 B = circular jet
Fig. 3 C = vertical fat jet
The spray pattern indication can be found on the front part of the sprayer. With the arrowhead
towards the boss on the tip.
21
