DVB JVC LT-26DF7BK Manual Download

Page: 15 / 40

- 14 -

Press or OK button to start downloading

data to VCR. TRANSFER is displayed in the

menu.

7UDQVIHULQJ

'RZQORDG79!'(9,&(

If FEATURE NOT AVAILABLE is displayed,

download was not performed correctly. Before

trying to download again, check that:
The VCR power is turned on.
The VCR is T-V LINK compatible.
The VCR is connected to EXT-2.
The scart cable is fully wired.

Direct REC:

You can easily record to VCR the images that

you are watching on the TV. For details, read

the manual for your VCR. Use your VCR con-

trols you can not carry out Direct REC using

your TV control.
When the VCR is not ready (For example when

there is no tape inserted), NO RECORDING

is displayed.
When you press the following buttons (

/ I,

, TV / DTV, ZOOM,

, AV, MENU,

SUBTITLE

, GUIDE,

, BACK,

number buttons) during recording, a message

appears asking if you want to stop recording

or not. Press

button to stop recording or

BLUE button to continue recording.

Do not turn the TV off in the following cases:

When recording images from an external

device connected to TV (For example

camcorder).

When recording a TV channel after it has

been unscrambled on a decoder.

When recording a TV channel by using the

TVs output because the VCRs own tuner

can not properly receive that channel.

When recording Digital terrestrial broadcast-

ing (DVB-T).

TV autopower on/VCR image view:

When the VCR starts playing, the TV automati-

cally turns on and images from

EXT-1 and

EXT-

2 appear on the screen.
This function does not happen if your TVs main

power is turned off. Set your TVs main power

to on (StandBy Mode).

Basic Operations

You can operate your TV using both the re-

mote control and TV buttons.

Operation with the buttons on the TV

Volume Setting

Press

button to decrease volume or

button to increase volume, so a vol-

ume level scale (slider) will be displayed at

the middle of the bottom on the screen.

Programme Selection

Press

button to select the next pro-

gramme or

button to select the previ-

ous programme.

Switching input mode

Pressing

TV/AV/OK

button will change the

input mode.

Entering Main Menu

Press

button to enter Main menu. In

the Main menu select submenu using

button and enter the sub-

menu using

or TV/AV/OK or

MENU button. To learn the usage of the

menus, refer to the Menu System sections.

Operation with Remote Control

The remote control of your TV is designed to

control all the functions of the model you se-

lected. The functions will be described in ac-

cordance with the menu system of your TV.
Functions of the menu system are described

in following sections.

ENG-26775W-17MB15-1895UK-(LT-26DF7BK)-(TVAVOK)-10044419-5009XXXXX.p65

08.11.2006, 10:13

Summary of Contents for JVC LT-26DF7BK









































Search results

Summary of Contents for JVC LT-26DF7BK

Reviews:

Related manuals for JVC LT-26DF7BK

Brands by name

Popular brands

DVB JVC LT-26DF7BK, Manual

Search results

Summary of Contents for JVC LT-26DF7BK

Reviews:

Related manuals for JVC LT-26DF7BK

Brands by name

Popular brands