- 34 -
Press
button.
Select the required subcode page number
by pressing four digit buttons (e.g. 0001).
If the selected subcode page is not displayed
in a short time, press
button. TV
programme will be displayed on the screen.
Teletext page number will be displayed on
the upper left corner of the screen when the
selected page is found.
Press
button to display the selected
Teletext page.
To exit Teletext
Press
button. The screen will switch to
TV mode.
Fastext and Toptext
Your TV supports the
1000
page Teletext sys-
tem. When the page number of any of the
1000
pages in memory is entered, the system will
not search for the requested page; instead it
will display the page automatically.
Press
button to move the Teletext
screen forward one page at a time.
Press
button to move the Teletext
screen backward one page at a time.
For Fastext and Toptext
The subject-heading for the information may
have a particular colour.
Press an appropriate
RED
,
GREEN
,
YELLOW
or
BLUE
button in order to reach the relevant
page quickly.
For TOPTEXT
If Toptext transmission is present, colour
coded buttons will appear in status row.
If Toptext transmission is not present, status
row will not appear.
In Toptext mode the
or
com-
mands will request the next or previous page
respectively. If Toptext transmission is not avail-
able, in case of operation of these commands,
wraparound occurs. For example page 100
appears to be one greater than page 199.
Connect Peripheral
Equipment
There is a wide range of audio and video equip-
ment that can be connected to your TV.
The following connection diagrams show you
where the different (Optional) equipment should
be connected at the rear side of the TV.
Via The Scart
This
LCD TV has 2 Scart sockets. If you want
to connect peripherals (e.g. video, decoder,
etc.) which have Scart sockets to the TV, use
SCART 1 or SCART 2.
If an external device is connected via the Scart
sockets, the TV will be switched to AV mode
automatically.
Via Aerial Input
If you want to connect to your TV, peripherals
like video recorders or decoders, but the de-
vice you want to connect does not have a Scart
socket, you should connect it to the Aerial in-
put of the TV.
If the VCR is connected via Aerial input it is
suggested to use Programme 0.
Decoder
Cable TV offers you a wide choice of prog-
rammes. Most of them are free, others are to
be paid for by the viewer. This means that you
will need to subscribe to the broadcasting
organisation whose programmes you wish
to receive. This organisation will supply you a
corresponding decoder unit to allow the prog-
rammes to be unscrambled.
For further information ask your dealer. See
also the booklet supplied with your decoder.
Connect a decoder with an aerial socket
to the TV
Connect the aerial cable.
Connect a decoder without an aerial
socket to the TV
Connect the decoder to the TV with a Scart
cable to
EXTERNAL
.
ENG-26775W-17MB15-1895UK-(LT-26DF7BK)-(TVAVOK)-10044419-5009XXXXX.p65
08.11.2006, 10:14
34
