11
DVDO-Matrix-44-Mini_V1.0.0
DVDO
DVDO-Matrix-44-Mini 4x4 HDMI Matrix with Audio Outputs
User Manual
IR Remote Control
You can switch among multiple inputs for each output display by pointing the
matrix IR remote directly at the IR window on the front panel or the IR receiver
connected to the rear panel.
Steps for IR Remote Operation:
1. Point the matrix IR Remote directly at the IR window on front panel or at the
IR receiver connected to the rear panel. As shown in the following picture:
Point the IR Remote at the
IR window directly
Point the IR remote at the
IR receiver head directly
2. Locate the target output you want to switch inputs for on the remote,
numbered 1-4 vertically along the right side.
3. Press the desired input number to select the corresponding input source for
your target output.
