Section3: Operating DVDO EDGE GREEN with Remote and Menus
37
Input Select Using The Menu
Main Menu -> Select Input
y
Remember that when you use manual select, you are disabling Auto Select.
Select Input
Auto
is the default setting. If more than
one input has an active signal, the one
selected depends on the
Input Priority setting. The active input
with the highest priority will be selected.
Input Priority can be set by going to
Main Menu -> Settings -> Input Priority.
Inputs can be selected manually.
Position the highlight bar over an input
name and press
OK
.
You can also select input directly using the Input Select buttons on the EDGE GREEN remote control.
