DVDO Matrix
44
10
6.4
Remote Control
1
POWER: Press this button to switch
the system ON/OFF.
2
OUT A/D: Press these buttons one
a time along with an IN buttons to
select an input source for an
output display.
3
MENU: Press to enter into the menu.
4
ENTER: Press to confirm the selection.
5
IN1~4: Press the IN buttons to select
4
an input from the 4 input sources.
6
ALL: Press this button to select all
outputs to display with an input
source.
7
TAKE: Press this button to confirm
the selection of an IN and an OUT
button. (Same as “GO” on main
unit)
12
8
CANCEL: Press this button to cancel the IN/OUT selection.
9
PRESET: Press “PRESET”, the menu will show Preset and select IN 1~4.
After preset 1~4, press “TAKE” to confirm the selection or press
“CANCEL” to cancel the selection.
10
LOCK: Press this button to lock all button functions on the panel.
Press 3 seconds to relieve the lock function.
11
MODE: TAKE Mode/R.T.(Real Time) mode switch. When in Take/Go
Mode, user presses [Input, Ouput, GO] to switch, When in R.T. mode,
user presses [Input, Output] and switching happens right away
12
+/-: Press these buttons to move up/down under menu selection.
