10
3
Tera Term Pro has been configured to communicate directly with the
iScan HD through the serial port COM1. See below. Select the correct
COM port if the serial cable is not connected to COM1.
4
Click ‘OK.’ Now the serial port
setup is completed.
5
Tera Term Pro is now ready
to send the new software file
to the iScan HD.
There are two ways to perform software update: using the Front Panel
buttons or using the remote control and On-Screen Display (OSD).
If the iScan HD has not been installed in your home theater system,
just use the Front Panel buttons as described below.
Using the Front Panel buttons
1
Press the
Configuration
button repeatedly until the display shows
“SWUP” (
S
oft
W
are
UP
date).
2
Press the
Up
or
Down
arrow buttons until the display shows “YES”.
3
Press the
Enter/Exit
button to confirm the software update.
4
The Front Panel Display will show ‘LOAD’.
Using OSD and Remote Control
1
Press
Menu
button.
2
Select Configuration -> Software Update -> Yes.
3
Confirm by pressing the
Enter
button.
4
The Front Panel Display will show ‘LOAD’.
Software Update
(continued)
Setting up the iScan HD for software update
