RESET BUTTON:
1)
Locate the reset button on the left side of the TILE box under the antenna
2)
Use a pin or clip to hold down the button for 5 seconds
3)
The device will reboot to factory settings
SECONDARY AUTHENTICATION MODE:
Local Network Mode
is when you connect your TILE to your local network and anyone on the local network can connect and
share their screen, videos and other content. The easiest way to connect TILE to your Local Network is with WiFi.
Switch to
Local Network Mode
go to:
- DVDO TILE Settings
- Access Point / WiFi
- WiFi
-
Select your Local Network’s
WiFi
You can also connect to your Local Network by connecting a Ethernet cable to TILE.
If your network requires secondary authentication plug in USB mouse to USB 1 in back of TILE and follow onscreen instructions.
Once you are connected to your local network restart TILE.
Summary of Contents for TILE
Page 1: ...U S E R M A N U A L ...