Installation and Mounting
3
3.
Installation and Mounting
The physical installation of the unit is the first phase of making the unit
operational in a security plan. The goal is to physically place the unit, connect it
to other devices in the system, and to establish IP network connectivity.
When finished with the physical installation, refer to the
ioimage Thermal
CT-5320F/CT-5640F User and
Installation Guide
to complete the second phase of
installation, which is the setup and configuration of the unit.
Caution:
To avoid damage from overheating or unit failure, assure that there is
sufficient temperature regulation to support the unit’s
cooling/heating requirements. Operating temperature should be kept
in the range -40° to 60°C (-40° to 140°F), with no more than 95%
non-condensing humidity.
Attention:
Afin d'éviter tout dommage dû à une surchauffe ou toute panne de
l'unité, assurez-vous que la régulation de température est suffisante
pour répondre aux exigences de l'unité (refroidissement/chauffage).
La température de fonctionnement doit être maintenue dans la plage
de température spécifiée pour le produit (-40° à 60°C/-40° à 140°F,
sans condensation d'humidité supérieur à 95%).
Summary of Contents for ioimage CT-5320F
Page 2: ...CT 5320F CT 5640F Fixed Thermal Camera QIG ii...
Page 22: ......
