Issue: 03.05.2011
CIP-Process for DVZ-SKA-”BIOMASTER”-PLUS
Page 2 of 6
SKA-PLUS-ANNEX P1-Eng
General
Caution:
This product has been developed in
accordance with state-of-the-art technology; it is
manufactured with utmost care and subject to
continuous qualitycontrol.
These operating instructions are intended to
facilitate familiarization with the unit and its
designated use. The manual contains important
information for reliable, proper and efficient
operation. Compliance with the operating
instructions is of vital importance to ensure reliability
and a long service life of the unit and to avoid any
risks.
These operating instructions do not take into
account local regulations; the operator must ensure
that such regulations are strictly observed by all,
including the personnel called in for installation.
This pump / unit must not be operated beyond
the limit values for the medium handled, capacity,
speed, density, pressure, temperature and motor
rating specified in the technical documentation.
Make sure that operation is in accordance with the
instructions laid down in this manual or in the
contract documentation. Contact the manufacturer, if
required.The name plate indicates the type series /
size, main operating data and identification number;
please quote this information in all queries, repeat
orders and particularly when ordering spare parts. If
you need any additional information or instructions
exceeding the scope of this manual or in case of
damage please contact DVZ SERVICES GmbH.
Safety
These operating instructions contain fundamental
information which must be complied with during
installation, operation and maintenance. Therefore
this operating manual must be read and understood
both by the installing personnel and the responsible
trained personnel / operators prior to installation and
commissioning, and it must always be kept close to
the location of operation of the machine / unit for
easy access. Not only must the general safety
instructions laid down in this chapter on ”Safety” be
complied with, but also the safety instructions
outlined under specific headings.
Marking of instructions in the manual
The safety instructions contained in this manual
whose non-observance might cause hazards to
persons are specially marked with the symbol
general hazard sign to ISO 7000-0434
The electrical danger warning sign is
safety sign to IEC 417 - 5036,
The word
Caution
is used to introduce safety instructions whose non-
observance may lead to damage to the machine and
its functions. Instructions attached directly to the
machine, e.g.
- arrow indicating the direction of rotation
- markings for fluid connections
must always be complied with and be kept in a
perfectly legible condition at all times.
Summary of Contents for Biomaster PLUS Series
