11
Programming URC-100 Remote Control
to Operate the DuoVision™ Processor
The DuoVision
™
system is shipped with two IR/RF preprogrammed/learning re-
mote controls. They can be programmed to control both video displays, all other
video input sources and even audio sources. The system also comes with an RF
remote control “Expander” to allow complete control of the system at distances
exceeding 100 feet through walls.
For DuoVision
™
System comprising a TransVision
™
4 projector and Plasmaimage
™
display:
• Control the TransVision
™
4 (on Display 1) using the
TV
device button and program
the brand code: 177
• Control the Plasmaimage
™
(on Display 2) using the
AUX
device button and pro-
gram the brand code: 257
For DuoVision
™
System comprising two Plasmaimage
™
displays:
• Control the first Plasmaimage
™
on Display 1 using the
TV
device button and
program the brand code: 177
• Control the second Plasmaimage
™
on Display 2 using the
AUX
device button and
program the brand code: 257
Programming the Brand Codes:
To program the
TV
device for brand code 177:
1.
Press the
TV
device button.
2. Press and hold both the
SHIFT
and
ENTER
buttons for 3 seconds. The display
will blink “Set” and then “TV.”
3. Enter the DuoVision
™
brand code
177
4. Press the
LIGHT
button on the right hand side to complete the programming.
To program the
AUX
device for brand code 257:
1.
Press the
AUX
device button.
2. Press and hold both the
SHIFT
and
ENTER
buttons for 3 seconds. The display
will blink “Set” and then “AUX.”
3. Press
MUTE
button
4. Press
right
▶
button twice to select
TV
device.
5. Enter the DuoVision
™
brand code:
257
6.
Press
SELECT
button to save the brand code.
7. Press the
LIGHT
button on the right hand side to complete the programming.
To operate other audio and video devices refer to the
URC-100 and MRF-100 Owner’s
Manual.
Summary of Contents for DuoVision
Page 1: ...DuoVision DuoVision 1 3 Printed in USA...
Page 2: ......
