29
2C. Ceiling Mount Installation and Projector Mounting
The optional ceiling mount kit (CMB) consists of three parts. Before beginning the
installation process, first identify each of the three parts of the mounting system
as shown in the pictures below.
NOTE: The ceiling must be capable of safely supporting the weight of the projec-
tor and mount, which is approximately 25 pounds.
A1
C1
C2
B2
B1
A2
Ceiling Mount Kit
Ceiling Bracket A
Ceiling Bracket B
Ceiling Assembly C
Do Not Remove Hex Nuts!
1. Disassemble the Ceiling Mount Kit by removing and saving the two rear hex
screws located on both sides of the Ceiling Mount Kit.
2. Loosen the middle two hex screws and slide out from the “L” shaped groove
brackets “A” and “B” as a unit.
3. On bracket “A”, remove and save all four hex head screws and separate bracket
“A” from bracket “B”.
Summary of Contents for DuoVision
Page 1: ...DuoVision DuoVision 1 3 Printed in USA...
Page 2: ......
