30
Ceiling Mount Kit Installation continued
4. Mount ceiling bracket “A” to the ceiling, making certain that the “FRONT” label
faces the screen.
5. Place bracket “B” inside bracket “A” and then secure the two pieces together
using the four hex head screws, making certain that the “FRONT” label faces
the screen.
6. Turn the projector upside down and place ceiling assembly C over the bottom
of the projector, with the “FRONT” label facing toward the lens.
NOTE: DO NOT
ATTEMPT TO LOOSEN THE FIVE HEX NUTS ON THE CEILING ASSEMBLY “C”,
THEY ARE SEALED!
7. Use provided four 0.4” countersink screws to attach the ceiling assembly “C”
to the projector.
8. Raise the assembly “C” and the Projector as a unit and hang from bracket ”B” by
sliding two center side screws on bracket “B” into the “L” shaped groove at the
outer edges of the assembly “C” mounting bracket. Secure the two assemblies
together using the hex screws on the left and right sides of the projector.
The projector is now suspended from the ceiling mount bracket.
Summary of Contents for DuoVision
Page 1: ...DuoVision DuoVision 1 3 Printed in USA...
Page 2: ......
