6
Processor Front Panel Controls
The front panel control buttons operate one display device at a time.
To switch between displays, use the
Front Panel
option in the
Setup
menu.
The DuoVision
™
Processor front panel controls include:
• A
POWER
button to turn the system On or Off.
• An indicator light (
LED)
which is lit when the unit is turned on and blinks when a
valid IR command is received.
— When the LED is DARK, the AC power to the unit is turned off.
— When the LED is flashing On and Off, power is connected and the unit is in
standby mode.
— When the LED is on, the unit is powered on.
— When the LED is flashing fast, this indicates that the lamp failed to ignite. The
lamp may fail to ignite if the lamp is either burned or hot. In case the lamp is
hot, wait approximately 1 minute to turn the unit on.
• An
IR
Receiver Window
• A
MENU
button to display the
Main
menu or to return to the previous menu.
•
Up
▲
and
down
▼
FUNCTION
buttons to sequence through the on-screen
menu options.
•
Left
◀
and
right
▶
VALUE
buttons to adjust values or to move to a sub-menu.
Summary of Contents for DuoVision
Page 1: ...DuoVision DuoVision 1 3 Printed in USA...
Page 2: ......
