6
Processor Front Panel Controls
The TransVision
™
3E Processor front panel controls include:
• A
POWER
button to turn the system On or Off.
• An indicator light (
LED)
which is lit when the unit is turned on and blinks when
a valid IR command is received.
— When the LED is DARK the AC power to the unit is turned off.
— When the LED is flashing On and Off, power is connected and the unit is
in the standby mode.
— When the LED is on the unit is powered on.
— When the LED is flashing fast, this indicates that the lamp failed to ignite.
If the lamp failed to ignite, the lamp may either be burned or hot. In case
the lamp is hot, wait approximately 1 minute to turn the unit on.
• An
IR
Receiver Window
• A
MENU
button to display the Main menu or to return to the previous
menu.
•
Up
▲
and
down
▼
FUNCTION
buttons to sequences through the on-screen
menu options.
•
Left
◀
and
right
▶
VALUE
buttons to adjust values or to move to a sub-
menu.
