- 13 of 23 -
Rename Ratios
The
"Aspect Ratio"
refers to the format of played video
signal. For example, a DVD player which is connected to
the
Y/Cr/Cb
input may be used to playback either
standard 4:3 aspect ratio format or letterbox format. This
menu permits to rename the aspect ratios. A
Default
name is provided for each aspect ratio such as
4:3 STD,
Letterbox
or
Anamorphic
.
q
To enter a different name, use the cursor to highlight
Rename
Aspect Ratios
and follow the same
instructions as in the
Rename Inputs
menu.
Default New Names
4 x 3 STD 4 x 3 STD
Screen Setup
The
Screen Setup
menu is used to correctly position the
projected image onto the screen. A white field pattern is
generated upon entering the menu and is used to select
the desired screen aspect ratio, mounting position, and,
vertical position of the prospective projected image for the
16:9 or 15:9 screen aspect ratio.
To Select the Aspect Ratio of Your Screen:
q
Select the
“Screen”
option in the
“Screen Options”
menu.
q
Use the left
`
or
right
a
buttons to select either 4:3, 16:9, 16:9A, or 15:9 aspect ratio.
16:9A aspect ration should be selected when an optional anamorphic lens is used with the projector.
The mounting option allows you to choose from
“Front Floor,” “Front Ceiling,” “Rear Floor,”
or
“Rear Ceiling”
configurations.
To Set the Mounting Position of Your Projector:
q
Select the
“Mounting”
option in the
“Screen Options”
menu.
q
Use the left
`
or
right
a
buttons to select the desired position.
For screens with a 16:9 or 15:9 aspect ratio, the vertical position can be adjusted.
To adjust the vertical position:
q
Select the
“V. Position”
option in the
“Screen Options”
menu.
q
Use the left
`
or
right
a
buttons to position the white field pattern with the screen.
Screen Options
Screen
¿
16:9
¡
Mounting
¿
Front Ceiling
¡
V. Position
¿
60
¡
