DWMEIGI MG8710 User Manual Download

Page: 12 / 17

DWMEIGI MG8710 ELECTRIC FOLDING BIKE

Lubrication:

For a long service life the following parts of your E-Bike should be regularly lubricated every half year:



Front axle



Chain



Rear axle



Freewheel



Front fork and other rotation parts.

For electrical parts, you do not need to lubricate them because they are lubricated in the factory. If you

find anything wrong, please go to a bicycle specialist or contact Fortis.

Cleaning:

The bike should be cleaned with a damp sponge, taking special care not to get electrical parts wet

(Battery connection, motor (rear axle), electric cables, handlebar controls, etc.). Dry with a cloth. When

cleaning your electric bike, do not use a steady direct stream of water from a hose. Use a cloth to avoid

short-circuiting any electrical components. Your electric bike has a durable finish and does not need to be

waxed. Clean with a mild detergent and buff to restore its original shine if needed.

Summary of Contents for MG8710


















Search results

Summary of Contents for MG8710

Reviews:

Related manuals for MG8710

Brands by name

Popular brands

DWMEIGI MG8710, User Manual

Search results

Summary of Contents for MG8710

Reviews:

Related manuals for MG8710

Brands by name

Popular brands