Series IEF Insertion Electromagnetic Flow Transmitter
BACnet / Modbus
®
- Operating Instruction
Bulletin F-IEF-PT
Modbus
®
is a registered trademark of Schneider Automation, Inc.
Network Termination Jumper
On the terminal block PCBA there is a jumper, J1 (see figure UUUU), that enables or
disables a network termination resistor as defined below:
When the network jumper is placed in the ON position there is a 120 ohm termination
resistor in place. When the network jumper is placed in the OFF position there is no
termination resistor in place.
Default: OFF
NETWORK TERMINATION JUMPER
®
DWYER INSTRUMENTS, INC.
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46360, U.S.A.
Phone: 219/879-8000
Fax: 219/872-9057
www.dwyer-inst.com
e-mail: info@dwyermail.com
