Select one of the Bins to retrieve by pointing to the circle next
to the Bin number and clicking on it. When you have selected
a Bin to retrieve, click on OK to begin the retrieval process. The
LoggerStor will show a progress bar much like what is
displayed when retrieving information from a data logger.
After the information has been retrieved from the LoggerStor, it
will be automatically displayed as an auto-scaled graph.
At this point the information can be treated the same as if it
were retrieved from a data logger. Refer to the instructions that
came the the LCL05 package to use the various options of the
LCL software.
Erasing the LoggerStor Bins
A hidden option is available to erase all of the Bins in the
LoggerStor. This will completely remove all information stored
in every Bin. Start with the LoggerStor OFF.
Press and Hold
RETRIEVE/UP ARROW
and
PRINT/DOWN
ARROW
.
Press the ON button on the LoggerStor until the opening
message is visible.
After a brief delay the display will change to a clear memory
message.
When this message is displayed release the
RETRIEVE/UP
ARROW
and
PRINT/DOWN ARROW
buttons.
The display will prompt the user to select the erase function or
to cancel.
Push the
PRINT/DOWN ARROW
button to erase the informa-
tion stored in the LoggerStor Bins. Any other button will cancel
the erase function and return you to the opening menu.
Replacing the Battery in the LoggerStor
When the LoggerStor will not be used for an extended period,
or when the battery is exhausted, it is strongly recommended
to remove the battery to avoid damage to the LoggerStor from
battery leakage.
USE ONLY ALKALINE BATTERIES IN THE LOGGERSTOR.
Substitution of a different battery can result in reduced perfor-
mance or permanent damage to this instrument.
To replace the LoggerStor’s battery follow the steps below:
1. Make sure the LoggerStor is OFF. If you are using the
optional AC adapter disconnect it now.
2. Remove the rear battery cover.
3. The battery and battery clip may be extended from the
battery compartment to facilitate replacement.
4. Remove the battery from the battery clip and dispose of
properly.
5. Line up the connector of the new battery and push onto the
pins of the battery clip with a firm motion.
Do NOT reverse
the battery connection, even momentarily, as this can
result in the loss of data or permanent damage to the
logger.
6. Place the battery in the battery compartment of the
LoggerStor.
7. Replace the battery cover.
MAINTENANCE
No routine maintenance is required on the Model LS1 Data
Logger Storage. Please contact Dwyer Instruments, Inc. before
returning unit for repair to review information relative to your
application and obtain a return authorization number. When
returning a product to the factory, carefully package and ship
freight prepaid. Be sure to include a complete description of
the application and problem and identify any hazardous mate-
rial used with the product.
DWYER INSTRUMENTS, INC.
Phone: 219/879-8000
www.dwyer-inst.com
P.O. BOX 373 • MICHIGAN CITY, INDIANA 46361, ,U.S.A. Fax: 219/872-9057
e-mail: info@dwyer-inst.com
Lit-By Fax: 888/891-4963
©Copyright 1999 Dwyer Instruments, Inc.
Printed in U.S.A.8/99
FR R1- 443116-00
21%
