- 29 -
DXE-SSVC-2P - Stainless Steel V-Clamp for steel pipe, 2 inch V-bolt
This V-Clamp is made in one size that fits Steel tubing or pipe from 1" to 2'' OD as used in antenna construction. The supplied V-
bolt is long enough to attach tubing to thick plates and is made with anti-corrosive properties. The special Stainless Steel saddle has
serrated teeth will clamp to the pipe securely by biting into the surface. For this reason, it is not recommended for
softer aluminum tubing or pipe. Ideal for fastening a radial plate and antenna mounting to a steel pipe.
Used to clamp 1 to 2'' (OD) steel tubing or pipe
Designed for attachments that don't require resistance to torque
V-bolt and saddle made from high-strength 18-8* stainless steel
The use of an anti-seize compound is HIGHLY recommended to achieve proper torque and prevent galling.
DXE-MBV-ATU-1 - Multiband 43 ft Vertical Antenna Tuner Add-on Kit
The DXE-MBV-ATU-1 is the perfect solution for the modest power (200 watts maximum) DXer who wants maximum performance
on a 43 foot tall multi-band vertical antenna! Now you can hear and work the weak ones! Just install on your antenna mount and
start operating.
NO MANUAL TUNING!
Now you can have full performance 80-10 meters with no coaxial cable mismatch
loss! A no compromise system! A Bias Tee is included with this special package for supplying the 12 Vdc power through the
coaxial cable from your radio shack to the remote tuner.
Works on all DX Engineering, Zero-Five, MFJ and Hy-Gain 43 foot
vertical antennas. Also on your own vertical antenna homebrew creation! Shown here in a typical installation with with
optional radial plate and tilt base:
DXE-MBV-ATU-1 Features:
• MFJ-927 Remote IntelliTuner™ - 200 Watts
• DXE-FCC050-H05-A Feedline Current Choke
• DXE-SSVC-2P Stainless Steel Mounting V-Clamp
• Custom Laser Cut Stainless Steel Bracket for Tuner and FCC
• Bias Tee Power Injector for 12 Vdc
• RG-8X 2 ft Coaxial Cable with PL-259 Connectors
• 2 Tinned Copper Braids, 1" wide for connection to your optional Radial Plate
• Feedline wire - 14 ga insulated stranded copper with Ring Terminal attached.
UMI-81343, DXE-NSBT8 - Anti-Seize & Never-Seez
An Anti-seize compound MUST be used on any Stainless Steel nuts, bolts, clamps or other hardware to prevent galling and
thread seizure. Any of these products can be used for this purpose.
*
UMI-81343
Anti-Seize, 1 oz. Squeeze Tube
*
UMI-81464
Anti-Seize, 8.5 oz. Aerosol Can
*
DXE-NSBT8
Never-Seez, 8 oz. Brush Top
*
DXE-NMBT8
Never-Seez, 8 oz. Brush Top, Marine Grade
* These products are limited to domestic UPS Ground shipping only
DXE-P8A - Penetrox A Anti-Oxidant - 8 oz Squeeze Bottle
Use Penetrox A electrical joint compound to affect a substantial electrical connection between metal parts such as
telescoping aluminum tubing or other antenna pieces. Ensures high conductivity at all voltage levels by displacing
moisture and preventing corrosion or oxidation. For Aluminum to Aluminum, Aluminum to Copper, or bare
conductors. Not recommended for use with rubber or polyethylene insulated wire.
8 oz. squeeze bottle
* This product is limited to domestic UPS Ground shipping only
DXE-RADW - 500K or 1000K Radial Wire Kits and Components
To achieve optimal performance with a ground-mounted vertical, install as many radials as possible. These bulk radial wire kits
use insulated wire that is UV resistant, hard to see and lays down easily, unlike the wire that is commonly available at the big box
stores. It will last much longer in contact with soil than bare wire.
The DXE-RADW- 500K or 1000K kit provide everything you will need to build the perfect radial system!
500/1000 ft. spool of 14 AWG, stranded copper wire with vinyl insulation
20/40 lugs
100/200 radial wire anchor pins- Eliminating the need to bury your radials!
Build up to 20/40 radials, 25 feet long
DXE-RADW-500K
Bulk Radial Wire Kit, 500 ft Spool of Wire, 20 Lugs, 100 Staples
DXE-RADW-1000K
Bulk Radial Wire Kit, 1000 ft Spool of Wire, 40 Lugs, 200 Staples
