- 3 -
Tools Required
Two 7/16 wrenches, (one of them should be open-end)
5/16 inch, 3/8 inch, 7/16 inch, and 1/2 inch wrenches or
5/16 inch, 3/8 inch, 7/16 inch, and 1/2 inch sockets and drive
Medium size flat blade screwdriver or 5/16 nut driver for the element clamps
Medium size flat blade screwdriver or 1/4 nut driver for the smaller element clamp
Tape measure and Felt-tip marker
DXE-MBVE-2 Parts List
Item:
Qty
Item:
Qty
Tilt Base, 3/16" Laser Cut Stainless Steel
1
2.000" x 0.058" x 36" Tube. Drilled.
1
DXE-SSVC-2P V-Saddle Kit
2
1.875" x 0.058" x 18" Tube. Cut & drilled.
1
Tilt Base, Mast Mount Channel
1
1.875" x 0.058" x 36" Tube. (Slit one end)
1
DXE-TB-1 Tilt Base Plate
1
1.750" x 0.058" x 36" Tube. (Slit one end)
1
1/4-20 x 2" HH Bolt, full thread
4
1.625" x 0.058" x 36" Tube. (Slit one end)
1
1/4-20 x 1" HH Bolt, full thread
1
1.500" x 0.058" x 36" Tube. (Slit one end)
1
1/4" Flat Washer
6
1.375" x 0.058" x 36" Tube. (Slit one end)
1
1/4" Star Washer
2
1.250" x 0.058" x 36" Tube. (Slit one end)
1
1/4" Split Washer
4
1.125" x 0.058" x 36" Tube. (Slit one end)
1
1/4" Aluminum Spacer
4
1.000" x 0.058" x 36" Tube. (Slit one end)
1
1/4-20 Hex nut
6
0.875" x 0.058" x 36" Tube. (Slit one end)
1
1/4" Fender Washer, 1" OD
4
0.750" x 0.058" x 36" Tube. (Slit one end)
1
1/4-20 Flanged Nut
2
0.625" x 0.058" x 36" Tube. (Slit one end)
1
1/4-20 Nyloc nut
4
0.500" x 0.058" x 36" Tube. (Plain)
1
3/8 U-Bolt x 2" ID x 3.25" leg
2
Element Clamps
12
2" Saddle for 3/8" U-Bolt
2
3/8-16 Hex Nut
4
3/8" Split Washer
4
3/8" Flat Washer
4
Manual Updates
Every effort is made to supply the latest manual revision with each product. Occasionally a manual
will be updated between the time your DX Engineering product is shipped and when you receive it.
Please check the DX Engineering web site (www.dxengineering.com) for the latest revision manual.
