- 10 -
Tinned Copper Braid
Quality tinned copper braid in 5 widths for grounding applications.
Preassembled
with lugs
in selected widths and lengths -
for both #10 and 1/4" bolt sizes. Contact Customer Service for special lengths or terminations.
Sold per foot
to
accommodate almost any project. Very long per-foot lengths may not be continuous. Contact Customer Service to discuss
your length needs if continuous length is required. A major use of the Grounding Straps for amateur radio operators would
be to ground one's rig, amp, etc. to a copper strip running behind the desk which acts as the central ground point for the
equipment. This central point equipment ground would then be routed away with heavy copper strap to join any other
similarly protected branches for SPG single point grounding.
DXE Part Number
Description
DXE-TCB-100
Braid Tinned Copper 1" wide Sold per ft
DXE-TCB-075
Braid Tinned Copper 3/4" wide Sold per ft
DXE-TCB-063
Braid Tinned Copper 5/8" wide Sold per ft
DXE-TCB-050
Braid Tinned Copper 1/2" wide, Sold per ft
DXE-TCB-038
Braid Tinned Copper 3/8" wide, Sold per ft
DXE-TCB05-RT01
Braid Tinned Copper 1/2" wide #10 ring terminals 1 ft
DXE-TCB05-RT03
Braid Tinned Copper 1/2" wide #10 ring terminals 3 ft
DXE-TCB05-RT05
Braid Tinned Copper 1/2" wide #10 ring terminals 5 ft
DXE-TCB05-RT10
Braid Tinned Copper 1/2" wide #10 ring terminals 10 ft
DXE-TCB05-RT18I
Braid Tinned Copper 1/2" wide 1/4" ring terminals 18"
DXE-TCB05-RT24I
Braid Tinned Copper 1/2" wide 1/4" ring terminals 24"
DXE-TCB05-RT36I
Braid Tinned Copper 1/2" wide 1/4" ring terminals 36"
DXE-TCB075-RT18I
Braid Tinned Copper 3/4" wide 1/4" ring terminals 18"
DXE-TCB075-RT24I
Braid Tinned Copper 3/4" wide 1/4" ring terminals 24"
DXE-TCB075-RT03
Braid Tinned Copper 3/4" wide 1/4" ring terminals 3 ft
DXE-TCB10-RT01
Braid Tinned Copper 1" wide 1/4" ring terminals 1 ft
DXE-TCB10-RT18I
Braid Tinned Copper 1" wide 1/4" ring terminals 18"
DXE-TCB10-RT24I
Braid Tinned Copper 1" wide 1/4" ring terminals 24"
DXE-TCB10-RT03
Braid Tinned Copper 1" wide 1/4" ring terminals 3 ft
DXE-TCB10-RT05
Braid Tinned Copper 1" wide 1/4" ring terminals 5 ft
DXE-TCB10-RT10
Braid Tinned Copper 1" wide 1/4" ring terminals 10 ft
Coax Grounding Bracket, 1-1/2 inch V-bolt - DXE-CGB-150
Coax Grounding Bracket, 2 inch V-bolt - DXE-CGB-200
The DXE Coax Grounding Brackets are a versatile solution for providing additional grounding of the coaxial cable
shields. The Stainless Steel brackets are supplied with a Stainless Steel V-bolt and hardware for fastening to tower
legs or any tubular OD up to 2 inches. Each bracket has holes for two optional DXE-363-SST bulkhead connectors ,
two chassis mount SO-239 connectors or two DXE-1023 Type N bulkhead connectors - or combinations as needed.
The Grounding Bracket is an ideal tower top junction point for the flexible antenna coax jumpers (often used to form
a rotor loop) and the main runs down the tower leg. It may also be used at the base of the tower to provide a solid
grounding point before the coax cable is routed away from the grounded tower.