- 3 -
Installation
The
DXE-UE-2P
can be mounted on exterior walls covered with wood, aluminum or vinyl siding
or in the mortar joints of a brick or block wall. Use the three point mounting bosses as shown in
Figure 2
. If you are mounting to masonry, install masonry anchors in the mortar joints and use the
appropriate screws. Toggle bolts or other specialty anchors may be needed depending on the
mounting surface. If necessary, the enclosure can be mounted on a pipe or post with strap clamps.
See
Figure 2
.
DX Engineering has Stainless Clamps in a variety of sizes.
Figure 2 - Enclosure Mounting Options