- 8 -
Alpha Delta Coaxial Protectors - DC Pass-Through
Transi-Trap Surge Protectors are gas surge arresters designed to protect sensitive electronic equipment from damage due to excess
voltage or currents generated by transient phenomena (lightning or static buildup). The elements in the Arc-Plug™ Cartridge consist
of two metal electrodes hermetically sealed in a rugged gas filled, ceramic cylinder. They perform
as voltage-dependent switches which can reliably and repeatedly carry large currents for brief
periods of time. In operation, a sufficient voltage across the element cause an arc to form between
the electrodes, changing its impedance from greater than 10,000 meg-ohms to a few milli-ohms in
less than 100 nanoseconds time. While conducting in the arc mode, the voltage across the surge
arrester is less than 30 volts. DELTA Switches and Transi-Traps are currently being used by all
branches of the U.S. Military in installations around the globe. The military applications have
grown over the years to include the Air Force's space surveillance system, Raytheon's Patriot Missile, U.S. Coast Guard DGPS
System, Ticonderoga Class Missile Cruiser's satellite communications by General Dynamics, Northrup Grumman's Marine SSB
system for the Navy's L.A. Class nuclear subs, HF point to point installations by ARINC in Afghanistan and Iraq and the Navy's
sonabuoy system protecting U.S. aircraft carriers. These customers and dozens of others in government/military and the commercial
sector are a great reason for radio amateurs to buy and use the best.
DXE Part Number
Description
ALF-ATT3G50U
Alpha Delta 500 MHz 200 Watts Protector SO-239
ALF-ATT3G50UHP
Alpha Delta 500 MHz 2 kW Protector SO-239
ALF-ATT3G50
Alpha Delta 3 GHz 200 Watts Protector N Connector
ALF-ATT3G50HP
Alpha Delta 3 GHz 2 kW Protector N Connector
ALF-3G-ARCPLUG
Alpha Delta Replacement Arc Plug 3G50, 200 Watts
ALF-3G-ARCPLUGHP
Alpha Delta Replacement Arc Plug 3G50, 2 kW
DXE-ATT3G-BRKT - DX Engineering Straight Flange Mounting Brackets
DX Engineering Straight Flange Mounting Brackets are handy accessories for mounting lightning protectors or
other devices to a grounding panel. Specially made for the protectors that are sold only with a stud, these brackets
convert them to flange mounting to a flat panel. Panel mounting hardware is included.
DXE-RCT-BRKT - DX Engineering Right Angle Flange Mounting Brackets
DX Engineering Right Angle Flange Mounting Brackets are handy accessories for mounting lightning protectors or
other devices to a grounding panel. Specially made for the protectors that are sold only with a stud, these Right Angle
brackets convert them to flange mounting to a flat panel. Panel mounting hardware is included.
PPR-IX-1T - DATA 100 BASE T voltage protector
The IX-1T is a lightning protector for 2 wire telephone trunks. The IX is a fully weatherized, modular high
speed digital data / DC line protector. It incorporates 1 T board for use in high speed network and dc voltage
applications. The unique design of this device allows it to be used in a variety of different voice and data
applications.
Fast Response Times
Lower Differential Voltages and Harmonic Energies Than Gas Tubes
DXE-CCK - Copper Cleaning Kit
Includes
Scotch-Brite® abrasive scrub pad
Loctite® Anti Seize lubricant paste
Finger towlettes for clean up
Instructions included
For best results, the copper should be brought down to "white metal" before bonding and weather sealing.