- 9 -
DXE-P8A - Penetrox A Anti-Oxidant - 8 oz Squeeze Bottle
Use Penetrox A electrical joint compound to affect a substantial electrical connection between metal parts such
as telescoping aluminum tubing or other antenna pieces. Assures high conductivity at all voltage levels by
displacing moisture and preventing corrosion or oxidation. For Aluminum to Aluminum, Aluminum to Copper
or bare conductors. Not recommended for use with rubber or polyethylene insulated wire.
*This part is classified hazardous and is limited to domestic UPS Ground shipping only
DXE-PPR Bonding Clamps
DXE Part Number
Description
PPR-TK-1
PolyPhaser Copper Strap to 5/8 through 1-1/4 in. Tower Leg Ground Clamp
PPR-TK-2
PolyPhaser Copper Strap to 1-1/4 through 2-1/4 in. Tower Leg Ground Clamp
PPR-TK-3
PolyPhaser Copper Strap to 2-1/4 through 3-3/4 in. Tower Leg Ground Clamp
PPR-TK-4
PolyPhaser Copper Strap to 3-1/2 through 5 in. Tower Leg Ground Clamp
PolyPhaser #2 stranded - #10 solid Copper Wire to Copper Ground Rod Transition Clamps
DXE Part Number
Description
PPR-J-1
PolyPhaser #2 stranded thru #10 solid copper wire to 1/2 to 1-1/3 in. copper ground rod transition clamp
PPR-J-2
PolyPhaser #2 stranded thru #10 solid copper wire to 1-1/2 to 2-1/4 in. copper ground rod transition clamp
DXE-58R-112S 1-1/2 - 2 in. Copper Strap Clamp to 5/8 in. Ground Rod
The DXE-58R-112S adaptor bonds 5/8 in. ground rods to low impedance 1-1/2 in to 2 in. copper strap for high performance
grounding installations.
Copper strap must be cut and used to shim strap to rod clearance.
Using this clamp is faster and easier than building up the joint for an exothermic weld
1/4” 18-8 Stainless Steel hardware is included
DXE-10C-112S #1/0 - #6/0 AWG Copper Wire to 1-1/2 - 2 in. Copper Strap Bonding Clamp
The DXE-10C-112S adaptor bonds #6/O AWG through #1/O AWG copper wire to low impedance 1-1/2 through 2 in.
copper strap for high performance grounding installations
Using this clamp is faster and easier than building up the joint for an exothermic weld
1/4” 18-8 Stainless Steel hardware is included
DXE-1C-112S #6 - #1 AWG Copper Wire to 1-1/2 - 2 in. Copper Strap Bonding Clamp
The DXE-1C-112S adaptor bonds #6 AWG through #1 AWG copper wire to low impedance 1-1/2 through 2 in. copper
strap for high performance grounding installations.
Using this clamp is faster and easier than building up the joint for an exothermic weld
1/4” 18-8 Stainless Steel hardware is included
DXE-MSC-3 1-1/2 - 2 in. Copper Strap to Copper Strap Bonding Clamp
The DXE-MSC-3 bonds 1-1/2 through 2 in. copper strap to copper strap for high performance grounding
installations.
Using this clamp is faster and easier than building up the joint for an exothermic weld
#10 18-8 Stainless Steel hardware is included