DX DX-BT19-S User Manual Download

Page: 7 / 17

DX-BT19-S 蓝牙技术手册

电话：

0755- 29978125

http://www.szdx-smart.com/

Input 200ms low pulse

Interrupt connection, module enters

standby

．

Dimensions:

．

LAYOUT

Precautions:

The DX-BT19 Bluetooth module works in the 2.4G wireless band. It should try to avoid the

influence of various factors on the wireless transceiver. Pay attention to the following points:

1. the product shell surrounding the Bluetooth module to avoid the use of metal, when using

part of the metal shell, should try to make the module antenna part away from the metal part.

The internal metal connecting wires or metal screws of the product should be far away

from the antenna part of the module.

3. The antenna part of the module should be placed around the PCB of the carrier board. It is

not allowed to be placed in the board, and the carrier board under the antenna is slotted. The

direction parallel to the antenna is not allowed to be copper or traced. It is also a good choice to

directly expose the antenna part out of the carrier board.

4. It is recommended to use insulating material for isolation at the module mounting position

on the substrate. For example, put a block of screen printing (TopOverLay) at this position.

Summary of Contents for DX-BT19-S


















Search results

Summary of Contents for DX-BT19-S

Reviews:

Related manuals for DX-BT19-S

Brands by name

Popular brands

DX DX-BT19-S, User Manual

Search results

Summary of Contents for DX-BT19-S

Reviews:

Related manuals for DX-BT19-S

Brands by name

Popular brands