34
You can use the “video/audio out” on the digital video camera to output the video/audio to an
external device (such as: TV), the method is as below:
●
Step one
Insert the black plug of the TV cable to the TV port on the back of the digital video
camera, and the yellow plug to the ‘ video in’ of the TV.
●
Step two
Insert the white and red plug of the AV cable to the audio input of the TV port, and
the black plug to the back of the audio in/out port on the digital video camera.
●
Step three
Switch the TV to the correct channel.
●
If the TV standard is not correct, you can switch to the appropriate standards
1.Enter the “Setup mode” page.
2. Use the
up button
▲
and
down button
▼
to select “video out”.
3. Then use the
up button
▲
and
down button
▼
to select NTSC or PAL standards and
press the
confirm button
■
.
Note:
Different TV manufacturers will have different broadcast channels, please refer to the
TV’s user manual.
5. Video output
Summary of Contents for DXG-572V
Page 15: ...14 The control procedures are on the next page...
Page 16: ...15...
Page 24: ...23 Battery status Memory status...
Page 45: ...44...
