network information (Profile Name, IP address, Subnet Mask, Gateway, etc.) will be
displayed on the screen.
Peer to Peer (Ad Hoc)
Peer to Peer mode, which is also called Ad Hoc mode or computer-to-computer mode, is
used to connect wireless clients directly together, without the need for a wireless router or
access point.
WPS (AP)
WPS, Wi-Fi Protected Setup, is used to connect a wireless router directly, without
searching SSID and inputting password. In this mode, you just need to configure the
parameters of your router which support WPS function. There are two modes for you to
select, PBC mode and PIN mode.
PBC:
Press WPS button or select the button mode on your router
Select the
PBC
mode on
this player to start testing, the connection process will take for a while.
PIN:
Input the pin code in the configuration menu of your router
Select the
PIN
mode on this
player to start testing, the connection process will take for a while.
3.1.6 Miscellaneous
Option
Description
Version Info
This tab shows you information about the software installed and
about the material components of your player.
Network Info
This tab shows you information about your network,MAC Address,
IP address Gateway, Subnet.
Parental control
Here you can lock TV channels. A password needed when you try to
enter this menu, please refer to ’
3.1.6 MISC->Password
’ for more
details about the password.
HDD spin down
Set the HDD to
Sleep Mode.
USB Upgrade
Please refer to ’
3.16 Firmware Upgrade
’for more details.
Pin Protection
To prevent read and write HDD by asking for a password.
Please refer to ’3.1.6 MISC->Password’ for more details about the
password.
Password
Change the password. The default password is ‘0000’. Press the
numerical buttons to input, and the OK button to confirm.
