- 3 -
755493-100 Rev. 1.0 (7/18)
GENERAL INSTALLATION INFORMATION
If you have installation or warranty questions please do not return the unit to the place of purchase.
Call 800-227-2734
Always protect tub from construction damage by using a protective cover. Damage, including chips and
scratches incurred at the jobsite is excluded from warranty but may be repaired by qualified technician at
the owner’s expense. Do not stand in the tub or store materials in the tub during construction. Do not store
tub in temperatures below 32 degrees Fahrenheit.
Protect all finished surfaces of the bathtub during construction and installation using a drop cloth.
BEFORE YOU BEGIN:
!
CAUTION
:
Risk of personal injury. This bath is heavy. Obtain sufficient help and use suction
cups/lifting straps to carefully lift or move the tub.
IMPORTAN
:
To ensure a successful installation it is important that you install the tub on a level finished floor.
• Observe all local plumbing and building codes.
IMPORTANT
:
An 8" Tail Piece, nut and washer is included in this package.
Make sure you locate and retain these pieces before discarding
the carton and packing material.
• Unpack and inspect the bath for damage.
• To simplify future maintenance, make sure all plumbing connections
around/under the tub can easily fit through openings or doorways.
• Install the tub to an adequately supported, level finished floor.
Refer to the Roughing-in information.
• Carefully plan moving the tub into the installation area prior to doing so.
This tub is heavy and will not easily fit through doorways.
• This tub is designed for a freestanding installation only.
• Illustrations shown may not look like your actual product but they are
still correct for this installation.
