- 1 -
INSTALLATION INSTRUCTIONS
SA
VE FOR FUTURE USE
Product names listed herein are trademarks of AS America, Inc.
© AS America, Inc. 2017
7302254-100 Rev. B (8/16)
RECOMMENDED TOOLS AND MATERIALS
Most of the procedures require the use of common tools and materials, which are
available from hardware and plumbing supply stores. It is essential that the tools
pand materials be on hand before work has begun.
Thank you for selecting DXV. To ensure this product is installed properly, please read these instructions carefully before you begin.
(Certain installations may require professional help.) Also be sure your installation conforms to local codes.
CAUTION: PRODUCT IS FRAGILE. TO AVOID BREAKAGE AND POSSIBLE INJURY HANDLE WITH CARE!
NOTE: Pictures may not exactly define contour of china and components.
!
DXV Modulus
™
Single Flush, 1-Piece
Concealed Trapway
Right Height
®
, Elongated Model D22020A Series
Regular Screwdriver
10'
Level
Putty Knife
Tape Measure
Hacksaw
Sealant
Adjustable Wrench
a.
Close toilet supply valve and flush tank completely. Towel or sponge remaining water from tank and bowl.
b.
Disconnect and remove supply line.
NOTE:
If replacing valve, first shut off main water supply!
c.
Remove old mounting hardware, remove toilet and plug floor waste opening to prevent escaping sewer gases.
d.
Remove closet bolts from flange and clean away old wax, putty, etc. from base area.
NOTE:
Mounting surface must be clean and level
before
new toilet is installed!
NOTE:
Distance from wall to
closet flange centerline must
be as listed below:
IMPORTANT:
Water supply on the
wall is required at 4 1/2" (114 mm)
from centerline of the toilet and
5" (127 mm) from the finished floor.
(see rough-in). Water supply is
hidden behind the toilet. Water
supply line needs to be hidden
within toilet frame.
1
2
REMOVE OLD TOILET
PARTS NOT INCLUDED
ALL INSTALLATION PROCEDURES MUST COMPLY IN STRICT ACCORDANCE WITH APPLICABLE LOCAL
PLUMBING AND BUILDING CODES
ROUGHING-IN DIMENSIONS:
28-1/4"
(717 mm)
6-1/8"
13/16"
(20 mm)
11-1/4"
(285 mm)
10-15/16"
(277 mm)
(155 mm)
18-1/2"
(470 mm)
16-1/2"
(419 mm)
FINISHED FLOOR
15-9/16"
(396 mm)
10-1/2"
(267 mm)
31"
(785 mm)
12"
(305 mm)
FINISHED
WALL
C/L OF SEAT POST
HOLES
14"
OR
4-1/2"
(114 mm)
5"
(127 mm)
WATER
SUPPLY
4-1/2"
(114 mm)
(356 mm)
Wax Ring
Flexible Supply Tube
Closet Bolts
