Customer Service 1-888-707-1880
17
Dyaco Canada Inc. 2016
Email: customerservice@dyaco.ca
Dot Matrix Center Display
Twenty columns of boxes (10 high) indicate each segment of a workout. The boxes only show an
approximate level (speed/incline) of effort. They do not necessarily indicate a specific value -
only an approximate percent to compare levels of intensity. In Manual Operation the
speed/incline dot matrix window will build a profile “picture” as values are changed during a
workout.
1/4 Mile (0.4 Km) Track
The 1/4-mile track (one lap) will be displayed around the dot matrix window. The flashing
segment indicates your progress. Once the 1/4-mile (Metric - 0.4 km) is complete this feature will
begin again. The Lap track will move in a counterclockwise direction there is a lap counter in the
message window for monitoring your distance.
Pulse Grip Feature
The Pulse (Heart Rate) window will display your current heart rate in beats per minute during the
workout. You must use both stainless steel sensors on the stationary grips to display your pulse.
Pulse value displays anytime the upper display is receiving a Pulse signal.
Calorie Display
Displays the cumulative calories burned at any given time during your workout.
Note:
This is only a rough guide used for comparison of different exercise sessions, and is not to
be used for medical purposes.
To Turn Treadmill Off
1. Display will automatically turn off (go to sleep) after 30 minutes (no key operations).The
treadmill will draw very little current in display mode (about as much as your screen when it is
turned off).
2. Remove the tether cord.
3. Turn off the main switch on the front of the treadmill, below the motor cover.
Program Keys
The program keys are used to preview each program. When you first turn the console on you
may press each program key to preview what the program profile looks like. If you decide that
you want to try a program, press the corresponding program key and then press the Enter key to
select the program and enter into the data-setting mode.
The treadmill has a built in heart rate monitoring system. Simply grasping the hand pulse
sensors on the stationary handle bars will start the Heart Icon blinking (this may take a few
seconds). The Pulse Display Window will display your heart rate, or pulse in beats per minute.
The console includes a built-in fan to help keep you cool. To turn the fan on, press the key on the
left side of the console.
