background image

D18XX Series PoE Midspan 4 to 16 ports - Installation Manual - D18XX-INST /11E/v1                                           Page 2 of 6 

 

 

 

1 Package 

Contents 

D18XX PoE Mid-span unit 

- Mains 

cable 

Four M4 x 8mm Philips flat head screws 

- Dycon 

warranty 

statement 

- D1800 

series 

manual 

2 Description 

The D1800 PoE Midspan Series is powered by one or more highly efficient switched mode power 
supplies that reduce rack cabinet heat and user running costs.  The unit is designed for simplicity and 
true “Plug and Play” system integration.  The unit will simultaneously supply over 30 watts to each 
connected powered device and individual ports are over-current protected according to the class of 
the connected device. 

2.1 Features 

 

IEEE 802-af and IEEE 802-at Type 1 and Type 2 compliant

 

 

Power supply better than 85% efficient at full load

 

  Genuine full power available simultaneously across all ports 

 

Fully automatic powered device signature detection and power limiting

 

 

4 to 16 port model variants available

 

 

3U 19 inch rack mounted and desk mounted versions

 

  Simple “Plug and Play” system integration 

  Full thermal and over-current protection 

  Power outputs transient protected 

  Power supply failure redundancy limited to multiples of 4 ports   

3 Installation 

 

D1804 – 4 ports – front plate 

 

D1808 – 8 ports – front plate 

All manuals and user guides at all-guides.com

Summary of Contents for d1800 Series







Reviews: