background image

 

Dual TV/Monitor Grommet Desk Mount (Duplex Series) 
Model: DE9E2S-G 
 

Instruction Manual 

Images may different from actual product

 

 
Disclaimer 

It is Dyconn’s intention to have all the correct information represented within this manual. 
Although  we  try  our  best,  Dyconn  makes  no  claim  that  the  information  comprised  herein 
covers all conditions or details in connection with installation or use of this product. Dyconn 
assumes  no  responsibility  for  accuracy  or  adequacy  of  information  comprised  in  this 
document. The information comprised here is subject to change without notice or obligation 
of any kind

 

 

  A warning alerts you to the possibilities of personal injury or damage to equipment 

if you do not follow the corresponding instructions. It is the installer's responsibility 
to make sure all components are properly assembled and installed using the 
instructions manual provided.   

 

 

Using  improper  screws  or  screw  size  may  damage  your  display.  If  spacers  are 
required,  be  sure  to  use  correct  size  of  screws.  Proper  screws  will  easily  and 
completely  thread  into  the  display  mounting  holes.  Inadequate  thread 
engagement in the display may cause display to fall.

 

 

  It is installer’s responsibility to make sure the combined weight of all components 

does  not  exceed  weight  capacity.  Exceeding  weight  capacities  can  result  in 
severe personal injury or damage to equipment.   
 

  Allowing any part of your component cables to be caught between movable parts 

can result in serious personal injury or damage to equipment. 

 

Read the following warning before installing

 

l

  Verify all parts are included. Do not install if the products or hardware is damage. Not 

all hardware included will be used. 

l

  Please contact a qualified installer. 

l

  This product contain moving parts, Use with caution. 

l

  Determine approximate location for mounting and keeping in mind the display size, 

extension, height adjustment and pitch / roll requirements. 

l

  This product contains small item, keep these items away from children 

l

  Do not exceed the maximum weight capacity for this product. Exceeding the weight 

capacity can result in serious personal injury or damage to equipment! 

 
 

Summary of Contents for DE9E2S-G


















Reviews: