3
Tools & Preparation
IMPORTANT WARNING
TOOLS REQUIRED
Tape Measure
Electronic Drill
Spirit level
Pencil
Philips Screwdriver
Hammer
Warning: Always switch off the electrical supply at the mains during installation
and maintenance.
Do not switch on the electrical supply at the mains until the end of the installation.
This product is fragile and easily breaks with glass, be cautious while fitting or handling to
prevent personal injury or damage. If the glass is broken, please stop using it and replace
it with the manufacturer. Ensure the mounting surface is dry and strong enough to bear
four times the weight of the product for safe fitting.
Special care should be taken when drilling walls to avoid hidden pipes or electrical cables.
This product covers the outlet box and the wirings after installation.
Wipe clean with a soft dry cloth. Never use abrasives or chemical cleaners.
Please put a soft cushion under the mirror while you take the mirror down from the wall.
