background image

BlueWave® MX-250 Emitter User Guide 

 

15 

Warranty

 

From date of purchase, Dymax Corporation offers a one-year warranty against defects in 
material and workmanship on all system components with proof of purchase and purchase 
date. Unauthorized repair, modification, or improper use of equipment may void your 
warranty benefits. The use of aftermarket replacement parts not supplied or approved by 
Dymax Corporation, will void any effective warranties and may result in damage to the 
equipment. 

IMPORTANT NOTE:

 

DYMAX CORPORATION RESERVES THE RIGHT TO INVALIDATE ANY 

WARRANTIES, EXPRESSED OR IMPLIED, DUE TO ANY REPAIRS PERFORMED OR ATTEMPTED ON 
DYMAX EQUIPMENT WITHOUT WRITTEN AUTHORIZATION FROM DYMAX. THOSE CORRECTIVE 
ACTIONS LISTED ABOVE ARE LIMITED TO THIS AUTHORIZATION. 

Index

 

Cleaning, 10 

Compatible Devices, 12 

Components, 5 

Connections, 7 

Declaration of Conformity, 14 

Glass Window Replacement, 10 

Help, 4 

Installation, 6 

Maintenance, 9 

Mounting, 7 

Parts List, 6 

Product Overview, 5 

Safety, 4 

Spare Parts, 11 

Specifications, 13 

Spectral Output, 13 

Support, 4 

Troubleshooting, 9 

Unpacking, 6 

Warranty, 15 

 

 
 
 

 

Summary of Contents for BlueWave RediCure MX-250 Emitter

















Reviews: