13
Dymax SG-200 High-Flow Spray Gun System User Guide
Unpacking & Inspecting Your Shipment
Your system arrives in one or more boxes depending upon which system you ordered. Inspect the boxes for
damage and notify the shipper of box damage immediately.
Open each box and check for equipment damage. If parts are damaged, notify the shipper and submit a claim
for the damaged parts. Contact Dymax so that we can ship new parts to you immediately.
Check that the parts included in your order match those listed. If parts are missing, contact your local Dymax
representative or our Customer Support team to resolve the problem.
Parts Included with the System
Your Dymax SG-200 spray gun system can be one of four types: cartridge reservoir system, bottle reservoir
system, pail reservoir system, or a system with high pressure, positive displacement ram pump. Each type of
system includes different parts as described below.
Parts Included in Cartridge Reservoir Systems
■
SG-200 spray gun with controlling air regulators
■
DVC-345 timed shot controller
■
Spray gun stand
■
Air filter/regulator
■
Air line kit
—
length of blue 1/4-in. (6.3-mm) OD tubing with fitting on one end
■
Air line kit
—
length of blue 1/4-in. (6.3-mm) OD tubing
■
Fluid line kit
—
length of black 3/8-in. (9.5-mm) OD tubing
■
Fluid line kit
—
adapter, 3/8-in. (9.5-mm) x 3/8-in. MNPT comp
■
One cartridge reservoir retainer: 12-oz (300-mL) or 20-oz (550-mL)
cartridge reservoir
■
One empty, reusable cartridge reservoir (shipped inside retainer)
Parts Included in Bottle Drop-In Reservoir Systems
■
SG-200 spray gun with controlling air regulators
■
DVC-345 timed shot controller
■
Spray gun stand
■
Air filter/regulator
■
Air precision regulator (mounted on bottle reservoir tank) that includes three pressure gauges:
0-30 psi (0-2 bar) for very low- to medium-viscosity materials
0-60 psi (0-4.1 bar) for medium-viscosity materials
0-100 psi (0-6.9 bar) for high-viscosity materials
■
Air line kit
—
length of blue 1/4-in. (6.3-mm) OD tubing
■
Fluid line kit
—
length of black 3/8-in. (9.5-mm) OD tubing
■
Fluid line kit
—
adapter, 3/8-in. (9.5-
mm) x 3/8” MNPT comp
■
One bottle reservoir tank fits 0.26-gal (1-L), 0.5-gal (2-L) and 1.0-gal (3.78-L) bottle reservoirs