4
2
Make sure that the tape and ribbon are taut across
the mouth of the cassette and that
the tape passes
under the label guides
.
If necessary, turn the ribbon rewind spool clockwise
to tighten the ribbon.
3
Insert the cassette and press firmly until the cassette
clicks into place.
4
Close the label cassette cover.
Each time you change the label cassette, you will be
prompted to choose the label width.
To remove the label cassette
1
Lift the label cartridge door on the back of the printer.
2
Remove the label cassette.
3
Insert a new label cassette as described above.
4
Select the new label width when prompted by the
printer.
Using the Printer for the First Time
The first time you turn on the power, you are asked to
select the label width and language. If you are outside the
United States, you may also be asked to set the units of
measure. These selections remain set until you change
them.
You can change these selections using the
key.
To set up the printer
1
Press
to turn on the printer.
2
Make your selections as prompted and press
.
Each time you change the label cassette, you will be
prompted to choose the label width.
You are now ready to print your first label.
To print a label
1
Enter text and choose format options to create a
custom message.
2
Press .
3
Press the cutter button to cut
the label.
4
Remove the backing from the
label to expose the adhesive,
and then stick!
Congratulations!
You printed your first label. Continue
reading to learn more about the options available for
creating labels.
Getting to Know the Printer
Become familiar with the location of the function keys on
your printer. Refer to Figure 1 on page 2. The following
sections describe each feature in detail.
Power
The
key turns the printer on and off. After two
minutes of inactivity, the printer is switched off
automatically.
When the printer is turned off, the current label text and
formatting are remembered and will be displayed when
power to the printer is turned back on.
When the batteries are removed and the optional power
adapter is disconnected, the current label text and
formatting are lost.
LCD Display
With DYMO’s exclusive graphical display, most of the
formatting you add is visible instantly.
Feature indicators along the top and bottom of the LCD
display appear black when a feature or setting is selected.
Label
guides
Ribbon
rewind
spool
1
Uppercase
4
Bold
2
Accented characters
5
Italic
3
Font size
6
Underline/Borders
Split backing
3
4
5
6
2
1
Summary of Contents for COLORPOP
Page 1: ... COLORPOP User Guide ...
