DYNABRADE
®
DYNABRADE, INC.,
8989 Sheridan Drive
•
Clarence, NY 14031-1490
•
Phone: (716) 631-0100
•
Fax: 716-631-2073
•
International Fax: 716-631-2524
DYNABRADE EUROPE S.àr.l.,
Zone Artisanale
•
L-5485 Wormeldange—Haut, Luxembourg
•
Telephone: 352 76 84 94 1
•
Fax: 352 76 84 95 1
© DYNABRADE, INC., 2006
PRINTED IN USA
PD03.27_Rev.1_08/06
Visit Our Web Site:
www.dynabrade.com
Email:
Customer.Service@Dynabrade.com
Optional Accessories
Dynaswivel
®
•
Swivels 360° AT TWO PIVOT POINTS allowing the air hose to
drop directly to the floor while providing superb tool handling.
95461
– 3/8" NPT
51989 Repair Collar
•
Specially designed collar for use in vise to prevent damage
to valve body of tool during disassembly/assembly.
97782 Retainer Repair Tool
•
Tool has a 3/8 in. square socket for use with 3/8 in. drive;
breaker bar, ratchet head, or torque wrenches.
Bearing Press Tool
•
Used to install bearings.
96243:
For installing 02057 Bearing.
96244:
For installing 01266 Bearing.
53698 Carrier Wrench
•
Carrier Wrench has a 3/8 in. square socket
for use with 3/8 in. drive; breaker bar,
ratchet head, or torque wrenches.
96209 Motor Repair Clamp
•
Specially designed clamp to secure motor
cylinder before disassembly.
53621 Over Hose Assembly
•
Over Hose Assembly directs exhaust
away from operator.
Dynabrade Air Lube
•
Formulated for pneumatic equipment.
•
Absorbs up to 10% of its weight in water.
•
Prevents rust and formation of sludge.
•
Keeps pneumatic tools operating longer
with greater power and less down time.
95842:
1pt. (473 ml)
95843:
1gal. (3.8 L)
Reference Contact Information
1. American National Safety Institute – ANSI
3. European Committee for Standardization
25 West 43
rd
Street
Rue de Stassart 36
Forth Floor
B - 1050 Brussels, Belgium
New York, NY 10036
Tel: 1 (212) 642-4900
Fax: 1 (212) 398-0023
2. Government Printing Office – GPO
Superintendent of Documents
Attn. New Orders
P.O. Box 371954
Pittsburgh, PA 15250-7954
Tel: 1 (202) 512-1803
95263
– 17 mm open-end wrench.
95281
– 19 mm open-end wrench.
96532 Motor Tune-Up Kit
•
Includes assorted parts to help maintain
and repair motor.
01902 Drop-In Motor - 4,500 RPM
01904 Drop-In Motor - 2,800 RPM
01905 Drop-In Motor - 1,250 - 1,800 RPM
•
Allows quick and easy replacement.
No motor adjustments needed.
30335 Air Supply Hose
•
3/8 in. I.D. x 60 in. Wide air supply
hose, includes: 3/8 in. NPT male and
female threaded fittings.
Dynabrade Angle Gear Oil
•
Specifically formulated to saturate wick system in right
angle gear head.
95848:
2 oz. tube
95849:
10 oz. tube
95541:
Push-Type Gear Oil Gun
95542 Grease 10 oz.
•
Multi-purpose grease for all types of
bearings, cams, gears.
•
High film strength; excellent resistance to
water, steam, etc.
•
Workable range 0˚ F to 300˚ F.
95541 Push-type Grease Gun
•
One-hand operation.
6" Disc Pads
(3,200 RPM Max.)
50828
(5/8"-11)
-
Foam-Backed Rubber-Face
Soft Pad for PSA.
57545
(5/8"-11)
-
Hook-Face Pad for
Reattachable Discs.
7-1/4" Disc Pads
(3,200 RPM Max.)
50853
(5/8"-11)
-
Hook-Face Pad for
Reattachable Discs.
50854
(M14x2)
-
Hook-Face Pad for
Reattachable Discs.
8" Disc Pads
(3,200 RPM Max.)
50829
(5/8"-11)
-
Foam-Backed Rubber-Face
Soft Pad for PSA.
50947
(5/8"-11)
-
Hook-Face Pad for
Reattachable Discs.
53209 Ergo-Handle
•
Increases operators comfort when
using unbalanced wheels.
50984 Top Handle Assembly
