background image

98222 Motor Tune-Up Kit 

Includes assorted parts to 
help maintain and repair motor.

59469 Drop-In Motor 
Note: Not for use with model 10287

Allows quick and easy replacement.
No motor adjustments needed.

96232 (#2) Arbor Press

This arbor press is ideal for the disassembly 
and assembly of air motors.

96346 2" Bearing Separator

Use the separator to remove gears
and bearings.

Dynabrade Air Lube

Formulated for pneumatic equipment.

Absorbs up to 10% of its weight in water.

Prevents rust and formation of sludge.

Keeps pneumatic tools operating longer
with greater power and less down time.

95842: 

1pt. (473 ml)

95843: 

1gal. (3.8 L)

57874 Repair Kit:

Contains special tools for 
disassembly/assembly of machine.

57091 Bearing Press Tool

This tool is used to push against the I.D.
of the bearing.

96066 SOCKET (3/4")

This tool is a thin wall socket specifically
designed for installing and removing

69359

Muffler Bodies.

96343 Retaining Ring Pliers

Internal/external retaining ring pliers.
Tip diameter - 0.038" (0.96mm)

95266

– 3mm Hex Wrench

DYNABRADE

®

DYNABRADE, INC.,

8989 Sheridan Drive   

Clarence, NY  14031-1419   

Phone: (716) 631-0100   

Fax: 716-631-2073   

International Fax: 716-631-2524

DYNABRADE EUROPE S.àr.l.,

Zone Artisanale    

L-5485 Wormeldange—Haut, Luxembourg    

Telephone: 352 76 84 94 1   

Fax: 352 76 84 95 1

© DYNABRADE, INC., 2012

PRINTED IN USA

PD10.04_Rev1

Visit Our Web Site: 

www.dynabrade.com

Email:

Customer.Service@Dynabrade.com

Optional Accessories

Machine Exhaust Assemblies

FIND THE MOST CURRENT OFFERING OF SUPPORT DOCUMENTS AND ACCESSORIES @ WWW.DYNABRADE.COM

Reference Contact Information

1. American National Standards

Institute – ANSI

25 West 43

rd

Street

Forth Floor
New York, NY 10036
Tel: 1 (212) 642-4900
Fax: 1 (212) 398-0023

3. Power Tool Institute, Inc.

P.O. Box 818
Yachata, Oregon 97498-0818
Tel: 1 (503) 547-3185
Fax: 1 (503) 547-3539

4. European Committee for Standardization

Rue de Stassart 36
B - 1050 Brussels, Belgium

2. Government Printing Office – GPO

Superintendent of Documents
Attn. New Orders
P.O. Box 371954
Pittsburgh, PA 15250-7954
Tel: 1 (202) 512-1803

Vacuum-Ready

Non-Vacuum

Index Key

No.

Part #

Description

1

57093

Vacuum Adapter

2

57065

Cone Muffler

3

56027

Muffler Insert (2)

4

69359

Muffler Cap

5

69274

Muffler Assembly

1

2

3

4

2

3

4

5

Optional: 30 quantity Muffler Insert available, P/N 

56054

.

Summary of Contents for Dynabug II 10280









Reviews: