Dynacord D 8A, Owner'S Manual

D 8A

7

7.

Your system is now ready for operation. Individual 
sound adjustments necessary can be made using the 
controls of the mixer’s corresponding input 
channels. 

8.

Now, have fun with your D 8A system!

9.

After use, first switch off the D 8A and then the 
mixing console, so that distracting power-off noise 
will not occur. When using a DYNACORD CMS mixer, 
no power-off noise will be output from the ‘Master 
Outputs‘. This allows switching off the mixer first 
without a problem.

2.4 Rigging

CAUTION:

We expressly point out that the relevant safety regulations must be observed for “flying“ loudspeaker 
systems. It is imperative that qualified expert advice is sought.

CAUTION:

Suspending any object is potentially dangerous and should only be attempted by individuals who have 
a thorough knowledge of the techniques and regulations of rigging objects overhead. Dynacord 
strongly recommends that D 8A speakers be suspended taking into account all current national, fed-
eral, state and local regulations. It is the responsibility of the installer to ensure that D 8A speakers are 
safely installed in accordance with all such regulations. If D 8A speakers are suspended, Dynacord 
strongly recommends that the system be inspected at least once a year. If any sign of weakness or dam-
age is detected, remedial action should be taken immediately.

Order No. see Specifications (page 20)

MB-D8 UMH

FB-D8

FB-D8 + FB-TV

FB-D8 + FB-TV
+ TC-TV

FB-D8 + FB-TV
+ PM-TV

FB-D8 + TC-02

FB-D8 + PCL-M10

MB-D8 UMH

+ TC-02

MB-D8 UMH
+ RMA +TMA

WMK-10