S P E C I F I C A T I O N S A N D O P E R A T I N G R E Q U I R E M E N T S
Dynamometer Specifications and Requirements
Version 4
In Ground Model 200iP/250iP Motorcycle Dynamometer Installation Guide
1-5
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DYNAMOMETER SPECIFICATIONS AND REQUIREMENTS
The following specifications and requirements will help you set up your dyno area
and verify you have the requirements to operate your dyno safely.
B
ATTERY
R
EQUIREMENTS
Your 200iP/250iP dyno is designed to carry a group 24 deep-cycle discharge series
battery for operating the starter, power carriage, and optional wheel clamp. The
typical dimensions for this series of batteries are 27 cm long by 17 cm wide by 23 cm
tall (10.625-inches by 6.75-inches by 9.125-inches). The mounting is flexible so a
battery that has dimensions close to this will work satisfactorily. The built-in battery
cables are configured for top-post batteries. This battery is not included with your
dyno. You will need to provide this battery. For more information on installing the
battery, refer to “Installing the Battery” on page 2-30.
C
HASSIS
S
PECIFICATIONS
description
specifications
Length
with standard carriage
allow 304.80 cm (120.00 in.)
with extended carriage
allow 355.60 cm (140.00 in.)
pit covers
137.16 cm (54.00 in.)
Height
from bottom of dyno to top of dyno
45.72-46.67 cm (18.00-18.38 in.)
from top of pit to drum guard
5.40 cm (2.13 in.)
from top of pit to top of tire carriage
50.64 cm (16.00 in.)
Width
dyno with eddy current brake
179.07 cm (70.50 in.)
pit covers with eddy current brake
208.28 cm (82.00 in.)
Weight
model 200iP drum module/crated dyno
725 kg (1600 pounds)/817 kg (1800 pounds)
model 250iP retarder module/crated dyno
953 kg (2100 pounds)/1,043 kg (2300 pounds)
Drum
diameter
45.72 cm (18.00 in.)
width
50.80 cm (20.00 in.)
Frame
structural steel channel and angle
Maximum Speed
322 KPH (200 MPH)
Maximum Motorcycle Length (front of front
wheel to center of rear wheel)
standard carriage
213.00 cm (84.00 in.)
extended carriage
256.54 cm (101.00 in.)
Remote Switches
remote software control
