Safety Regulations
2 — 2
APS03_013_0404GB
Use high−pressure cleaners only as specified and in a technically
perfect condition. Avoid danger by observing safety factors and the
specifications in the operating instructions. Any faults, especially
those affecting safety must therefore be rectified immediately.
Make sure that:
− safety equipment is not removed, rendered inoperable or
modified.
− safety equipment removed for the purposes of maintenance work
is refitted immediately after the work is completed.
Check operational safety every time you start work. Any defects
found or suspected must be repaired immediately. If necessary,
inform the project supervisor. Cease work if defects are found that
could jeopardise operational safety.
Use only high−pressure hoses, water hoses and couplings, etc. from
the machine manufacturer that are in perfect condition and suitable
for cleaning tasks.
If you sell on the high−pressure cleaner you must observe the
following:
Pass on to the new operator all the accompanying documentation
(operating instructions, maintenance instructions, diagrams,
machine cards, inspection certificates etc.) you received with your
high−pr essure cleaner. If necessary, you may have to order the
papers from us, specifying the machine number .
Reporting an onwards sale or acquisition to Putzmeister ensures that
you will be sent any information relating to modifications or
innovations relevant to safety, and you will also be eligible for
technical consultancy from our works.
Instruct the new operator and his operating personnel in the
operation of the machine, just as you were instructed by us, and
have them confirm that they have received instruction from you.
Should you so require, we will be happy to carry out the instruction of
the new operator and the new operating personnel on your behalf.
2.1
Principle
Onwards sale
