Safety Regulations
2 — 3
APS03_013_0404GB
The machine has been built in accordance with the state of the art
and recognised safety rules. Nevertheless, its use may constitute a
fatal risk to the operator or third parties, or cause damage to the
machine and to other property.
The machine should only be used as specified in the operating
instructions and the accompanying documents. All instructions and
safety regulations in the operating instructions must be stringently
observed.
The machine is intended for cleaning with pressurised water and
serves as a unit for emergency operation of Putzmeister concrete
pumps for boom and support operation.
The DYNAJET mg supplies cold pressurised water at a maximum of
350 bar, depending on the model.
Cold, clean mains water should be supplied to the machine via the
low−pr essure hose. Other materials should not be used.
The machine can be used for emergency operation of Putzmeister
concrete pumps for boom and support operation.
Always consult the machine supplier before using at oil hydraulic
installations.
Any protective covers belonging to the machine should be fitted
before operation.
The machine must only be operated with the safety equipment fitted.
Specified inspection work should be carried out at regular intervals.
Never make any modifications, additions or conversions to the
machine without first obtaining the manufacturer’s approval.
The machine must be inspected for operational reliability by a
technical expert at least once a year. The operator is responsible for
commissioning the inspection.
Any work on the electric system of the machine must be carried out
only by trained and qualified electricians.
2.2
Designated use
