Safety Regulations
2 — 11
APS03_013_0404GB
There is a risk of eye and skin injuries caused by hydraulic oil
discharging when screw connections are opened without the
complete system having been previously depressurised.
Lay and fit hydraulic lines professionally! Make sure the connections
are correct! Connectors and the length/quality of the hoses must
meet requirements.
Danger
Hoses that are fitted incorrectly pose a risk of injury from the force
produced by bursting hydraulic lines.
The operator is obliged to act in accordance with the Operating
Instructions.
Accidents which can be ascribed to the failure to comply with safety
regulations and German Accident Prevention Regulations:
− issued by German Industrial Employers’ Liability Insurance
Association; or
− the responsible corporate liability insurance company or
− the legal authorities in your country;
or to inadequate supervision, will be made the responsibility of:
− the machine operator; or (where he cannot be held responsible
due to lack of training or basic knowledge),
− his supervisors,
under the law.
Please therefore ensure that the necessary caution is taken.
The workplace refers to the area in which people remain in order to
carry out work.
The place of work of the operator while using the high−pressure
cleaner is at the high−pressure gun.
The working area refers to the area in which work is carried out using
the high−pressure gun. Parts of the working area can become
danger areas, depending on the job that is being performed with the
high−pr essure spray gun.
The working area and the working environment around the machine
must be cordoned off against unauthorised access by other
personnel when work is carried out. If necessary, erect warning signs
and barriers.
Lines
2.11 Liability
2.12 Place of work
Operator
2.13 Working area
